IMC Networks PD-Switch - Manual (Page 6)

3
Port LEDs
The ports on the PD-Switch include diagnostic LEDs that indicate unique information
about the port functionality and status.
PD-Switch-TX/5
For all units with 5 copper ports, the two LEDs associated with each twisted pair port
are defined as follows:
PD-Switch-TX/3+FX
On units with a 1x9 fiber port, the FDX LED of port 3 has been re-defined as the “FX-
LNK/ACT” LED for the fiber port. Note that the “LNK” LED requires a valid Link
signal and no Far-End-Fault (FEF) from the fiber line.
Port LED Name Color Function
OFF No link signal detected on copper port
GREEN Glows green when a twisted pair link is
established
LNK/ACT
Flash GREEN Activity is detected on the port
OFF Port is operating in Half Duplex
TX
FDX
AMBER Port is operating in Full Duplex
Port LED Name Color Function
OFF FEF or no link signal detected on FX port
AMBER Glows amber when the fiber link is
established
1X9 LNK/ACT
Flash AMBER Activity is detected on the port