Disabling security – Intermec CN2G User Manual
Page 62
Chapter 2 — Configuring the CN2G
50
CN2G Handheld Computer User’s Manual
Disabling Security
If you choose not to use security with your wireless network, you
can disable it on the CN2G. Intermec recommends that you
always set security in your network.
To disable security
1
Open Intermec Settings.
2
Choose Communications > 802.11 Radio > Security
Settings > Microsoft Security.
3
For Network Authentication, choose Open.
4
For Data Encryption, choose Disabled.
5
Tap Save.
6
Close Intermec Settings.