Power system checkout – IBM X23 User Manual
Page 42

2. Turn the computer upside down.
3. Remove the backup battery (see “1030 Backup battery”
4. Measure the voltage of the backup battery. See the
following figure.
k(-)
@
Red(+)
Blac
Wire
Voltage (V dc)
Red
+2.5 to +3.2
Black
Ground
a. If the voltage is correct, replace the system board.
b. If the voltage is not correct, replace the backup
battery.
c. If the backup battery discharges quickly after
replacement, replace the system board.
38
ThinkPad X20, X21, X22, X23, X24