Plumbing connections – InSinkErator MS User Manual
Page 4
Plumbing Connections
4
Figure 2. Typical Installation Diagram
PLUMBING CONNECTIONS
The flow control valve, syphon breaker and solenoid
valve are supplied with all complete disposer packages
(packed separately).
Make certain that the solenoid valve supplied is
the proper voltage. Make certain that the valves
are plumbed according to water flow direction
arrows marked on valves or the valves will not
function properly.
The flow control valve regulates all water flowing into
the disposer. This conserves water and prevents
overloading. Check direction of water flow arrows.
Syphon breaker must be installed above the sink flood
place
per local plumbing codes. Check direction of
water flow arrows.