Setting the clock – Insignia NS-H4005 User Manual
Page 28
26
Insignia NS-H4005 Home Theater System
www.insignia-products.com
4 Press
or
to select SETUP, then press MEMORY/ENTER.
The setup menu opens.
5 Press
or
to select AUDIO MODE, then or to select HI-FI
(recommended) or NORMAL.
6 Press
or
to select AUDIO OUTPUT, then or to select
one of the following:
•
STEREO–(Recommended) The left audio channel is sent to
the left speaker, and the right audio channel is sent to the right
speaker.
•
LEFT–The left audio channel is sent to both the left and right
speakers.
•
RIGHT–The right audio channel is sent to both the left and
right speakers.
7 Press MENU to close the menu.
Setting the clock
You need to set the clock if you want to set up timer recordings.
To set the clock:
1 Make sure that your home theater system is turned on.
2 Press VCR to select VCR mode.
Note
The initial clock setting is JANUARY 1, 2007, 12:00 AM.