Ipod operation – iSimple PXAMG User Manual
Page 7
8. To complete the installation secure the Media Gateway (PXAMG) and HD Radio
tuner (HDRT) into the cavity in the dash behind the radio. Be sure that the cables
and interface modules are not near moving parts or sharp metal edges as they may
damage the cables. To prevent rattling noises inside the dash, use zip ties, tape, or other
fasteners to mount the interfaces to the factory wiring or installed audio components.
9. With all connections made, reconnect the vehicle’s battery, insert the key into the
ignition, and turn the vehicle on. Check for proper operation of the Media Gateway and
HD Radio tuner before reinstalling the factory dash panels.
10. Note: The first time you access the Gateway, your radio may display “DEV INIT”
while the device is initializing. If this is displayed, please wait one minute then cycle the
ignition off and on. Then access SAT mode again to begin normal gateway operation.
6. iPod Operation
Entering Mode Select Menu
Press the “BAND” button a few times until XM is displayed on the screen.
Immediately turn the rotary TUNE KNOB in the top right hand corner to scroll
through
available sources. Once “IPOD” is displayed, press the “FWD>>” button to
select the displayed mode.
Next Track
Turn the rotary tune knob to the right one notch to advance to the next track.
Previous Track
Turn the rotary tune knob to the left one notch to move back to the previous track.
Fast Forward
Press
“►I SEEK” to fast forward the song that is playing. Press “►I SEEK”
again to resume play.
Rewind
Press
“I◄ SEEK” to rewind the song that is playing. Press “I◄ SEEK” again to
resume play.
Entering Browse Menu / Select
Press the “FWD>>”
button to enter the “BROWSE” menu or to make a selection
while in the “BROWSE” menu.
Menu UP
Press the “<
button to move up one folder in the “BROWSE” menu.
Exit Browse menu
Press “<
When the radio displays Browse, wait several seconds, to exit the browse menu.
5