i. Tech Dynamic Bluetooth Stereo Headphone User Manual

Page 2

Charging Your Headphones

The headphones come with a built-in rechargeable battery. Prior to using the headphones for
the first time, you are recommended to fully charge the battery.

Use only the supplied charger to charge the headphones.

� 3 hours are required to fully charge the headphones.

� Charging indication will be delayed for a few seconds if the headphones have not been used

for a long time or the battery is drained.

Pairing Your Headphones with a

Bluetooth

Mobile Phone

Pairing is only required the first time you use the headphones. Please refer to your mobile
phone user guide for pairing instructions.

1) Ensure the headphones are off.
2) To activate the pairing mode, press and hold the headphones’ MFB for 8 seconds without

releasing your finger until its status indicator flashes blue and red light alternately.

3) Activate your mobile phone’s Bluetooth, search Bluetooth devices, select “BlueBAND

Sport” and enter the password “0000”. When the pairing is completed, the headphones’
status indicator will flash blue light rapidly for five times.

If the pairing cannot be completed within 3 minutes after the pairing mode has been activated,
the headphones’ status indicator will flash purple rapidly for five times and then turns off.
Repeat steps 1 to 3 to pair both devices again.

Turning Your Headphones On and Off

� If your headphones are paired with your mobile phone, press the MFB once more

after you turned on the headphones to re-connect the mobile phone and
headphones.

� If you do not plan to use the headphones for a while, you are recommended to turn

off the

Bluetooth

function of your mobile phone.

Using Your Headphones

Call Functions

a short beep

Flashing purple light
Flashing blue light
Flashing blue light

Flashing blue light

Function

Button

Audio

Status Indicator

Press the

MFB

once

Press the

MFB

once

Press once

Double click
Press the

MFB

once

Press and hold either volume key

for 2 seconds

While speaking, press and hold

either volume key for 2 seconds

While speaking, press

once

Answer a call
End a call
Adjust Volume

Voice Dialing

Last No. Redial

say the voice tag as soon as you hear the short beep and you must have recorded the voice
tag into your mobile phone

Call Waiting
Call Reject

Call Transfer

(headset to mobile phone)

Call Transfer (mobile phone

back to headset)

Press the Volume + / Volume

once to increase / decrease by 1

step (Total 8 levels)

• Charging
• Fully charged
• Low battery
• Out of battery

• Red light
• Blue light
• Flashing red light
• The light goes off

• a short beep every 1 minute

Status Indicator

Audio

Status

Function
Turn on

Turn off

Press and hold the

MFB

for 2 seconds

Press and hold the

MFB

for 2 seconds

a short beep

a long beep

Flashing blue light for 3 times

Red light for 2 seconds and
then the light goes off

Button

Audio

Status Indicator

When you turn on your headphones for the first time, the headphones

automatically enter the pairing mode, i.e. the status indicator flashes blue and
red alternately. This allows you to immediately pair your headphones and mobile
phone. Please refer to “Pairing Your Headphones with a

Bluetooth

Mobile Phone”.