iLive IS809B - Manual (Page 10)

iLive | IS809B 10
OPERATIONS
Setting the Clock
Setting the Sleep Timer
Using the Wireless Remote
Using the Auxiliary Input
Setting the Timer
1. Press and hold the Time Set button.
2. While holding the Time Set button, press the
Skip/Search buttons to adjust the hour and
minute.
3. Release the Time Set button to set the adjusted
time.
1. Press the Sleep button repeatedly to adjust the
sleep timer between 60 and 10 minutes, in 10
minute increments.
When the set amount of time has expired, the
unit will power off.
The included remote is wireless and does not
require line-of-sight to control the unit.
The wireless remote can control the base station
from approximately half the distance of the
speaker reception. (Approximately 100ft line-of-
sight, or 45ft indoors)
Results will vary depending on the number and
size of obstructions between the base station
and the wireless remote.
The Volume buttons on the remote control will
adjust the master volume of the base station,
affecting all linked speakers.
The included speakers have independent
volume controls that can be used to fine tune
the volume of the individual speakers.
Note: The speakers need to be paired with the unit
before any audio can be heard.
1. Connect a mini-phono 3.5mm cable (not
included) or a mini-phono 3.5mm cable-RCA
R/L audio cable (not included) to the Auxiliary
Input on the unit and the audio output/
headphone jack on an MP3 player, television,
or stereo system.
2. Turn the unit on by pressing the Power button.
3. Press the Source button to switch the unit to
Auxiliary mode.
4. Audio played through the connected MP3
player, television, or stereo system will now be
heard through the unit.
1. Press and hold the Timer button.
2. While holding the Timer button, press the
Skip/Search buttons to adjust the hour and
minute.
3. Release the Timer button to set the adjusted
timer.
4. Press the Source button to select iPod or
Auxiliary mode.
An iPod must be docked, or an audio source
must be connected to the Auxiliary input when
the set time is reached. Otherwise, no audio
will play when the set time is reached.
5. Press the Power button to turn the unit off.
6. Press the Timer button to activate the set timer.
“Timer On” will appear on the LCD display
when the timer is activated.
After the set time is reached, the base station
will power on.
IMPORTANT: The wireless speakers must be
powered on manually before the set time is
reached. The timer will not power on the paired
wireless speakers.
Audio Source Required Connector
MP3 Player mini-phono 3.5mm Cable (not
included)
Television mini-phono 3.5mm Cable -
RCA R/L Audio Cable (not
included)
Stereo System mini-phono 3.5mm Cable -
RCA R/L Audio Cable (not
included)