iLive IT319 - Manual (Page 14)

IMPORTANT: This operation cannot be done
from the remote.
Press the Power Button to turn the bar speaker off.
Press and hold the Timer Button, the display will
begin to flash.
While holding the Timer Button, press the
Tuning/Skip Buttons on the bar speaker to adjust
the hour and minute of the clock.
Release the Timer Button to finish setting the
clock.
IMPORTANT: This operation cannot be done
from the remote.
Press the Power Button to turn the bar speaker on.
Press and hold the Timer Button until “ON”
appears on the display.
While holding the Timer Button, press the Tuning/
Skip Buttons to adjust the hour and minute.
While holding the Timer Button, press the Volume
Buttons to adjust the volume of the timer.
While holding the Timer Button, press the Source
Buttons to adjust the source of the timer.
Release the Timer Button to finish setting the on
timer. Press the Timer Button to turn the on timer
on or off. “Timer On” will appear on the display
when the timer is activated..
IMPORTANT: This operation cannot be done
from the remote.
Press the Power Button to turn the bar speaker on.
Press and hold the Timer Button until “ON”
appears on the display.
While holding the Timer Button, press the Power
Button. “OFF” will appear on the display.
While holding the Timer Button, press the Tuning/
Skip Buttons to adjust the hour and minute.
Release the Timer Button to finish setting the off
timer. Press the Timer Button to turn the off timer
on or off. “Timer Off” will appear on the display
when the off timer is activated.
An external AM and FM antenna are included with
the bar speaker. Connect these to the AM and FM
Antenna Inputs on the bottom of the unit before
attempting to use the built-in radio.
Press the Power Button to turn the unit on.
Press the Source Button to switch to AM or FM
radio mode.
Press the ◄ and ► Directional Buttons on the
remote to tune the radio.
You can also use the Tuning/Skip Buttons on the
unit to tune the radio.
After tuning to the desired AM or FM radio station,
press the Memory Button (on the remote).
Press the ▲ and ▼ Directional Buttons (on the
remote) to select a memory preset (ie. “P01”).
After you have chosen a memory preset, press the
Memory Button to save the selected station to the
selected memory preset.
To cycle through preset radio stations, press the
Preset Buttons (on the remote).
Basic oPerations
setting the clock setting a timer for the unit to Power on
setting a timer for the unit to Power off
tuning the am or fm radio
saving a radio station to the unit’s memory
reseting the Bar speaker
If the bar speaker is not responding correctly, try
resetting it.
Using a paperclip or like object, press the Reset
Button on the bottom of the bar speaker. This will
restore the bar speaker to it’s default settings.
GPX | TD1510 14