Ironman Fitness Envision - Manual (Page 9)

9
Assembly
ALLEN BOLT M8*30
2 PCS
ALLEN BOLT M8*20
2 PCS
WASHER 9*22*2
wrench Provided
Step 4
Align the holes on the console to the holes on the uprights. Secure the console onto the uprights
using one allen bolt M8*30 and one washer 9*22*2 going through the outside holes of each
side, and one allen bolt M8*20 and one washer 9*22*2 going through the holes in the front
of the handlebar area. When tightening the bolts going through the outside, use the wrench
provided to tighten the attached nut on the unit. Note: Do not overtighten bolts.