Infinite Peripherals PP-55 - Manual (Page 12)

. . . . . . . . . . . . . . . . . . . . . . . . . . . .
.
.
.
.
.
.
.
.
. Magnetic Card Reader
(MS Version only)
The PP-55MS has a built-in magnetic card reader. The card reader
incorporates a (3)-track magnetic read head requiring a single swipe to read
field data from all three tracks.
Magnetic Card Reader
Reader Activation
(Indicator)
Figure 9
The magnetic read head faces towards the PDA cradle. When placing the
card into the reader, the magnetic strip must be facing away from the PDA’s
cradle as show in the figure below. Keep the edge of the card flat on the
inner base of the reader to ensure that the magnetic strip passes over the
read head evenly.
Magnetic surface
(Direction)
Figure 10
Developer Notes:
Integrating the magnetic card reader feature into an application requires the
use of the PP-55 SDK’s. For detailed information on integrating the card
reader feature, refer to the User’s Manual for your specific device type.
Infinite Peripherals, Inc. Page 11
www.ipcprint.com
PP-55 Getting Started Version 1.08