Insignia NS-DV720PBL - Manual (Page 5)

Inserting or removing a memory card
Your camcorder has built-in memory for storing pictures and movies. You can increase the
memory storage by using an SD or SDHC memory card.
NOTE: When a memory card is inserted, your camcorder automatically stores pictures and movies on the memory
card instead of storing them in the internal memory.
To insert a memory card:
• Insert the card into the memory card slot with the arrow on the card pointing toward the slot
and the card label facing up.
To remove an installed memory card:
1 Push in on the memory card. The card pops out slightly.
2 Pull the card out of the slot.
Getting started
NOTE: Remove the clear plastic covering the lens and LCD display of your camcorder before using.
To turn your camcorder on:
Press down and hold the power button for one second.
- OR -
Open the LCD panel.
Rotate the LCD panel 90° counter-clockwise view pictures and movies.
To turn your camcorder off :
Press down and hold the power button for one second.
- OR -
Close the LCD panel.
Initial settings:
When you turn on your camcorder for the fi rst time, your camcorder will be in Simple Mode.
Simple Mode hides advanced settings and makes your camcorder easier to operate.
Turning on your camcorder for the fi rst time
When you turn on your camcorder for the fi rst time, you will need to choose a menu language
and set the date and time.
90°
90°
5