iRiver iMP-900 - Manual (Page 9)

Connecting player
15
Connecting player
Charging with AC Adapter
16
Using the rechargeable Batteries
Use only the AC Power Adapter supplied with the player for safety.
Connect the AC adapter to the 5.0V DC jack on the player first and then into AC
outlet. (AC adapter of this player is for 100~240V, 50~60Hz.)
The player will charge automatically when the player turns on after connecting
the AC adapter to the player. (Refer to page 17~18 for details)
Open the battery cover on the inside of the player.
Insert rechargeable batteries(Stick type x 2ea) matching + and - and close the
battery cover.
3 3
2 2
1 1
2 2
1 1
Using the External Battery Pack
Connect the external battery pack
as shown in the right figure.
Do not use mixed with new batteries and used batteries.
Do not use different types of batteries together.
When the batteries are not to be used for a long time, remove them.
If battery leaks, remove them.
If battery leaks, wipe off any residue in the battery compartment and
insert new batteries.
Do not recharge a normal battery.
The internal and external batteries are used simultaneously,
the batteries can be charged according to batteries’ condition.
CAUTION!
1 1
Connect Remote control / Earphones
Connect remote control cable to the player as shown on below diagram.
Connect earphone to the earphones jack of remote control. 2 2
1 1
When the battery level is low
It beeps every 10 minutes. ( Beep sound can be on/off. For details,
please refer to page 54)
iMP-900 may not function properly. Replacing battery or charging is
recommended
Using
the
Controls
Using
the
Controls
Open the battery cover on the external battery pack as below figure.
AA size battery x 4EA
Inserting batteries
2 2