Integra DPC-5.2 - Manual (Page 19)

19
SN 29343266 DPC-5.2
Notes
• Do not move the DVD Changer during playback. Doing so may damage
the disc.
• Use Open/Close 0 on the remote controller or DVD Changer to open
and close the disc tray. Do not touch the disc tray while it is moving.
Doing so may cause the DVD Changer to malfunction.
• Do not press down on the disc tray or put any objects other than playable
discs on the disc tray. Doing so may cause the DVD Changer to
malfunction.
• In many instances, a menu screen appears when playback of a DVD
movie is complete. Prolonged display of an on-screen menu may damage
your television set, permanently etching that image onto its screen. To
avoid this, be sure to press
7 once the movie is complete.
OPEN/CLOSE 0
SLOW
STEP e/E
DOWN 4 / UP ¢
FR 1 / FF ¡
PLAY £
PAUSE 8
SKIP
■ To remove the disc
VCD CD DVD
Press 0 to open the disc tray.
Remove the disc after the disc tray opens completely.
After removing the disc, be sure to press the button again to
close the tray.
Press Disc Skip on the DVD Changer or SKIP on the remote
controller to rotate the disc tray while the tray open.
■ To play in fast reverse or fast forward
VCD CD DVD
During normal playback, press 1/¡.
Each press of the same button changes the playback speed.
(At the time of DVD playback)
F.SEARCH 1 (approx. x2) → F.SEARCH 2 (approx. x4) →
F.SEARCH 3 (approx. x8) → F.SEARCH 4 (approx. x16) →
F.SEARCH 1 (back to the beginning)
(At the time of VCD/CD playback)
F.SEARCH 1 (approx. x2) → F.SEARCH 2 (approx. x4) →
F.SEARCH 3 (approx. x8) → F.SEARCH 1 (back to the beginning)
The rate and direction of playback is indicated by search
indicators (
2 or 3) in the display.
To resume normal playback, press £.
Notes
• The DVD Changer mutes sounds and omits subtitles during reverse
and forward scan of DVD-Video.
• The playback speed may differ depending on the disc.
■ To skip chapters or tracks
VCD CD DVD
During playback, press
4/¢.
The chapter (or track) in the direction of the button pressed is skipped,
and the selected chapter (or track) will be played from the beginning.
When
4 is pressed once during playback, the chapter (or
track) being played will be played from the beginning.
■ To pause playback (still mode)
VCD DVD
Press 8 during playback.
To start playback, press £.
■ Playing frame by frame
VCD DVD
Press 28/83 repeatedly.
Each time you press the button the picture advances one frame.
To resume normal playback, press £ .
Note
The sound is muted during still mode and frame by frame playback.
■ To play in slow-motion
VCD DVD
Press / during playback.
Each press of the same button changes the playback speed.
F.SLOW 1/16 → F.SLOW 1/8 → F.SLOW 1/4 → F.SLOW 1/2 →
F.SLOW 1/16 (back to the beginning)
The rate and direction of playback is indicated by search
indicators (
2 or 3) in the display.
To resume normal playback, press £.
Notes
• The sound is muted during slow-motion playback.
• The playback speed may differ depending on the disc.
Basic Playback
Various Playback
Tip to obtain a higher quality picture
Occasionally, some picture noise not usually visible during a normal
broadcast may appear on the TV screen while playing a DVD-Video
because the high resolution pictures on these discs include a lot of
information. While the amount of noise depends on the TV you use, you
should generally adjust the TV to reduce sharpness when viewing DVD-
Videos.