Insignia NS-HT511 - Manual (Page 9)

5
Insignia NS-HT511 Home Theater System
www.insigniaproducts.com
Front, center, and surround speakers Remote control
# Description Function
1 Keyhole slots Used to wall-mount the speakers.
2 Speaker terminals These push terminals are for connecting the
speaker to the receiver with the supplied
speaker cables.
3 Threaded Inserts These threaded inserts are for Init®-Home
Theater Speaker Mounts NT-SWM series.
S C-51A
Front speakers Rear speakers
Center speaker
Item Description Function
1 ON/STANDBY button Press to turn the power on to your receiver.
Press again to go to standby mode.
2 Remote mode input selector
buttons Press to directly select your receiver input
source.
3
ENTER / / /
TUNING+/–
Press the arrow keys to navigate through the
on-screen menus. Press ENTER to confirm a
selection or setting.
In tuning mode, press to tune to the next
(TUNING+) or previous (TUNING–) station.
4 SETUP button Press to open the on-screen menus.
5 LISTENING MODE buttons Press to select the listening mode you want.
See “Using the listening modes” on page 19
for additional information.
NS-HT511_11-0310_MAN_.book Page 5 Wednesday, April 13, 2011 11:12 PM