Ingersoll-Rand 66554-X - Manual (Page 2)

66554ĆX 2 OF 4
ASSEMBLY INSTRUCTIONS
1. Insert (4) leg (left) and (8) axle into (3) cart frame as shown in view.
2. Align the holes on the (4) leg and (8) axle to insert (7) cap screw thru
(3) cart frame. Attach (11) flat washer, (12) lockwasher and (13) nut.
NOTE: Two position holes are located in (8) axle to facilitate optional
wheel spacing. Maximum wheel spacing is for stability.
3. Place two (9) washers onto (8) axle with (1) wheel.
4. Attach (10) retaining ring to groove in (8) axle.
5. Repeat steps 1 thru 4 to attach (2) leg (right) and (1) wheel to (3) cart
frame.
6. Attach (23) or (17) bracket to (3) cart frame using two (16) cap
screws, (11) flat washers, (12) lockwashers and (13) nuts.
NOTE: Select a set ofholes that will give pump, that will be used, deĆ
sired clearance with floor.
7. Attach (15) handle to (23) or (17) bracket using four (14) cap
screws, (11) flat washers, (12) lockwashers and (13) nuts.
8. Mount (21) or (22) plate on pump to be used. Then place on (23) or
(17) bracket and fasten using (20) cap screws, (19) lockwashers
and (18) flat washers.
PARTS LIST
ITEM DESCRIPTION (Size in Inches) QTY PART NO. ITEM DESCRIPTION (Size in Inches) QTY PART NO.
1 Wheel (2) 91515
2 Leg (right) (1) 99306
3 Cart Frame (1) 66555
4 Leg (left) (1) 99305
5 Washer (2) 70607
6 Plastic Cap (2) 77366
7 Screw, Cap (1/2" Ć 13 x 5") (2) Y6Ć819ĆC
8 Axle (2) 99304
9 Washer (4) 91522
10 Retaining Ring (2) 99310
11 Washer, Flat (8) F15Ć27ĆC
12 Lockwasher (1/2") (8) Y14Ć816
13 Nut (1/2" Ć 13) (8) Y12Ć8ĆC
14 Screw, Cap (1/2" Ć 13 x 2") (4) Y6Ć89ĆC
15 Handle (1) 99303
16 Screw, Cap (1/2" Ć 13 x 1") (2) Y6Ć85ĆC
17 Bracket (model 66554Ć1only) (1) 66367
18 Washer, Flat (1/4") (model 66554Ć1 only) (4) Y13Ć4ĆC
(model 66554Ć2 only) (6) Y13Ć4ĆC
19 Lockwasher (1/4") (model 66554Ć1 only) (4) Y14Ć416
(model 66554Ć2 only) (6) Y14Ć416
20 Screw, Cap (1/4" Ć 20 x 5/8") (66554Ć1) (4) Y6Ć42ĆC
(model 66554Ć2 only) (6) Y6Ć42ĆC
21 Plate (model 66554Ć1only) (1) 91396
22 Plate (model 66554Ć2 only) (1) 92371
23 Bracket (model 66554Ć2 only) (1) 66543
* 24 Cap Screw (3/8" Ć 16 x 1Ć1/2") (4) Y6Ć67ĆC
* 25 Nut (3/8" Ć 16) (model 66554Ć1 only) (4) Y12Ć6ĆC
* 26 Nut (3/8" Ć 16) (model 66554Ć2 only) (4) Y12Ć106ĆC
* 27 Washer (3/8") (model 66554Ć2 only) (4) Y13Ć6ĆC
* 28 Lockwasher (3/8") (4) Y14Ć616
* Included but not shown