Intel Entry Redundant Power 2U ERP2U - Manual (Page 14)

SSI
ERP2U Power Supply Design Guide, V1.0
- 14 -
6.1.3 Required Peripheral Power Connectors
Connector housing: Amp 1-480424-0 or equivalent
Contact: Amp 61314-1 contact or equivalent
Table 8: Peripheral Power Connectors
Pin Signal 18 AWG Color
1 +12V2 (or +12V3) Yellow
2 COM Black
3 COM Black
4 +5 VDC Red
Note: The +12V power to peripherals may be split between 2 or 3 channel for the purpose of
limiting power to less than 240VA.
6.1.4 Required Floppy Power Connector
Connector housing: Amp 171822-4 or equivalent
Table 9: P9 Floppy Power Connector
Pin Signal 22 AWG Color
1 +5 VDC Red
2 COM Black
3 COM Black
4 +12 V2 (or +12V3) Yellow
Note: The +12V power to peripherals may be split between 2 or 3 channel for the purpose of
limiting power to less than 240VA.