ION iTTUSB User Manual
Page 2
iTTUSB Owner's Manual V5 - Page 2
(ENGLISH) QUICK START GUIDE
o
Make sure all items listed on the front of this guide are
included in the box.
o
READ SAFETY INSTRUCTION BOOKLET BEFORE USING
THE PRODUCT
o
Go to http://www.ion-audio.com for product registration.
GENERAL CONTROLS
1. Power Cable: This power cable should be plugged into a wall
receptacle AFTER all audio connections are made.
2. RCA Audio Output Cables: These cables should be plugged
into a CD or Auxiliary input on your computer. IMPORTANT:
There is a switch on the bottom panel, next to the RCA cables
that selects between PHONO/LINE. Use PHONO level for
plugging into a turntable input on a home stereo. Use the LINE
level for plugging into CD/AUX/TAPE inputs. WARNING: You
may damage your receiver if you plug in a LINE level
into a PHONO input.
3. USB Audio Output: Use the included USB Cable to connect
your turntable to your computer. Refer to the software
instruction guide before plugging in your turntable.
4. Power Button:
5. Platter: This platter must be securely fastened to the
turntable prior to operation. The Motor Drive Belt can be found