Iqua Snake Bluetooth Headrest Handsfree - Manual (Page 7)

6
EN
Getting Started
Installation
To install the Iqua Snake on the headrest of your car seat, start gently sliding it from either side
so that it wraps around the bars on the headrest. You may also use the tightening strap to
ensure that the Snake is well attached.
Charging the battery
Before you use the Snake, you must charge its battery for approximately 6 hours. Once the
battery is full, it will provide up to 10 hours of talk time and up to 10 days of standby time.
1. Connect the charger cable to the Snake.
2. Plug the car charger into the cigarette lighter of your car. A red light will turn on.
3. When the battery is fully charged, the red light will turn off.
Switching on and off
To switch the Snake on, press and hold down the button until the green light starts
flashing.
To switch the Snake off, press and hold down button until the lights turn off.