IFB Appliances Digital 7kg - Manual (Page 25)

÷ Ensure that the machine is properly balanced on four adjustable feet.
÷ Ensure that the machine is connected to 3 pin socket with good earth and 16 Amp MCB or other automatic short
circuit protection devices.
÷ The machine is tested with water during assembly for performance checking. Condensed droplets of
water may remain inside the drum. It is advisable to run the machine without wash load in
cotton 60 program with detergent for the first time after installation.
÷ Servicing should be handled by the Company’s authorized personnel only.
÷ Check label on garments for determining conditions under which fabrics are to be washed.
÷ Use detergent recommended for washing machine.
÷ Ensure that the electrical line on which the machine is used can take the required load.
÷ Check the inside of drum before loading the clothes.
÷ Protect the machine from direct sunlight and do not splash water on it. Clean with a damp cloth.
÷ Keep your machine dry to avoid corrosion/rusting. Take special care to wipe the machine after
cleaning the Coin trap.
÷
The machine should ideally be installed on the floor. It can be installed on any suitable platform
or trolley, if desired by the customer.
÷ Clean the shell lower and detergent tray periodically by taking out the detergent tray.
÷ Do not pull the cord to disconnect the plug. Hold the plug itself/do not insert or remove the plug with damp
hand.
÷
Do not drag the washing machine to its position. Always lift the or move the machine keeping the wheel’s
direction in mind.
÷
Do not move the washing machine if it contains the wash load or when in operation.
÷ Do not install the machine in a damp area or bathroom, with exposure to direct shower*.
÷ Do not spill water over the machine*. In case of spillage, wipe dry.
Safety Precautions