Installing zoom clamp/sleeve on type 2 lenses – Ikelite D90 User Manual
Page 14

Manual Focusing Note:
Ikelite DSLR housings are designed for auto-focus DSLR
cameras and lenses. Manual focusing is not recommended. In some
cases, if you desire to manually focus a lens, the zoom clamp must be
moved onto the lens Manual Focus Ring and you must use the housing
zoom control knob to manually focus. This will result in loss of zoom
capability.
14
Installing Zoom Clamp/Sleeve on Type 2 Lenses
(cont.)
Before installing the lens port and checking operation, make sure the
teeth on the Gear Sleeve mesh with the teeth on the housing Drive Gear,
shown below. When the port is installed, pages 15 & 16, it will lock the
Gear Sleeve in place. After installing the port, rotate the housing Zoom
Control Knob to see that the Gear Sleeve is properly rotating the Lens
Zoom ring.
IKELITE
Mesh
Gear Sleeve
teeth with
Black
Housing
Drive Gear
Figure G
- 6184.7 (5 pages)
- W-20 (1 page)
- Canon A640 (6 pages)
- DS-200 (24 pages)
- DSC-H5 (6 pages)
- Olympus SP-500 (6 pages)
- 6182.14 (7 pages)
- Nikon 7600 (6 pages)
- IXUS65 (6 pages)
- Canon PowerShot A700 (6 pages)
- PowerShot IXUS SD900 Ti (6 pages)
- Nikon D200 (7 pages)
- DSC-W50 (5 pages)
- IXY 3000 IS (1 page)
- Olympus C-740 (7 pages)
- SD870 IS (1 page)
- Canon 300D (6 pages)
- 6872.10 (6 pages)
- IXUS 90 IS (1 page)
- DSC-H9 (4 pages)
- Olympus SP-350 (7 pages)
- S610 (1 page)
- Nikon Coolpix P1 (7 pages)
- Canon IXUS 950 IS (5 pages)
- Olympus Mju760 (5 pages)
- DSC-P200 (6 pages)
- Canon EOS 10D (6 pages)
- ALL (20 pages)
- DSC-H3 (5 pages)
- DSC-P150 (6 pages)
- Olympus Mju780 (5 pages)
- Nikon L3 (7 pages)
- C-575 (1 page)
- W150 (1 page)
- Olympus D-230 (3 pages)
- MG-HD3 (2 pages)
- FinePix F50fd (5 pages)
- S520 (1 page)
- SD770 (1 page)
- DSC-V1 (6 pages)
- Olympus C-60 (6 pages)
- Olympus E-3 (7 pages)
- PowerShot A710IS (7 pages)
- Nikon 5400 (5 pages)