Insignia NS-R5111 - Manual (Page 5)

NS-R5111 Arm Band Radio
3 www.insignia-products.com
Installing the batteries
To install the batteries:
1
Open the battery compartment door located on the
back of your radio.
2 Insert two AAA batteries, making sure that the + and
– on the batteries match the + and – inside the
battery compartment.
3 Replace the battery compartment door.
Flashing low battery alert
If the low battery indicator on the LCD starts flashing, the
batteries should be replaced. Replace batteries when
required. When not using your radio for an extended
period of time, remove the batteries.
• Do not mix old and new batteries.
• Do not mix alkaline, standard (carbon-zinc), or
rechargeable (nickel-cadmium) batteries.
• Dispose of batteries according to local
environmental laws.
Operating your radio
To operate your arm band radio:
1
Press the ON/OFF button to turn on the radio.
2 Press the BAND button to select AM or FM.
3 Insert the headphone plug into the Phone Jack.
Note
Your earphone soft wire works as the antenna
for FM reception. You may need to extend the
wire to obtain the best reception.