Insignia NS-DV111080F - Manual (Page 8)

ENGLISH 09-1204
4 Press the Navigation control right/left or press
/ on the screen to view diff erent pictures.
• To view a picture slideshow, press on the screen.
• To view picture thumbnails, press on the screen.
5 Press the Playback button again to return to Photo mode.
To connect to a computer:
1 Power off your camcorder.
2 Insert the small end of the included USB cable into your camcorder.
3 Insert the large end of the included USB cable into the USB port of
your computer.
To connect to a TV using the AV cable:
1 Insert the USB plug of the AV cable into your camcorder.
2 Insert the RCA plugs of the AV cable into the RCA sockets of your TV.
To connect to a TV using a mini HDMI cable
(not included):
1 Insert the small end of the mini HDMI cable into your camcorder.
2 Insert the large end of the mini HDMI cable into the HDMI
port of your TV.
Installing included software
To install TotalMedia™ HDCam:
1 Insert the installation CD into your computer’s DVD-ROM/CD-ROM drive.
2 The CD runs automatically. Follow the instructions to complete the installation.
If the CD does not automatically run, follow the steps below to install the software:
1 Double click My Computer.
2 Use the mouse to point to the DVD-ROM/CD-ROM drive.
3 Right-click the mouse, then click Open.
4 Double-click TotalMedia HDCam.exe. A wizard appears to guide you through the
installation procedure.
5 Follow the instructions to complete the installation.
To access the complete User Guide:
Insert the enclosed CD into your computer and open the User Guide fi le or visit
www.insigniaproducts.com.
8