Marantz DV7600 - Manual (Page 54)

Additional Information 7
54
The disc containing the MP3 tracks won’t play.
• If the disc is a recordable CD, make sure that the disc is
finalized.
Check that the track(s) are in the MPEG1 Audio Layer
3 format.
Check that the sampling rate of the track(s) are 44.1
or 48kHz.
Some MP3 tracks appear to be missing from a disc.
• If a track name does not end in “.mp3” or “.MP3”, this
player will not recognize it as an MP3 track.
• This player only recognizes about 250 files on a disc. If
there are more titles than this, you will not be able to play
them.
• This player is not compatible with multi-session discs. If
the disc is multi-session, you will only be able to play
tracks recorded onto the first session.
Noticeable difference in DVD and CD volume.
• DVDs and CDs use different recording methods. This is
not a malfunction.
Cannot play multi-channel audio.
• Make sure that 5.1 Channel is selected in the Audio Out
menu (pages 41-42).
• Check that the settings in the Speaker Setting screen are
correct (page 43).
• Check the audio options available from the disc’s menu.
No digital audio output.
• Check that Digital Out setting is set to Bitstream/PCM
(page 39).
• Some DVD-Audio discs prohibit digital audio output.
• No digital audio is output when playing Super Audio CDs.
Cannot output 192kHz or 176.4kHz digital audio.
• The player does not output digital audio at these
sampling rates.
• Only 48/44.1 kHz output is available when HDMI is
connected.
Cannot output 96kHz or 88.2kHz digital audio.
• Check that the PCM Down Sample setting is not set to
On (page 40).
• Some discs are digital copy protected and do not output
high sampling rate digital audio.
• Only 48/44.1 kHz output is available when HDMI is
connected.
No DTS audio output.
• If this unit is connected to a non-DTS compaible amplifier
or decoder using a digital audio cable, set Digital Out to
PCM in the Setup menu. If you do not do this, noise will
be output if you try and play a DTS disc.
• If this unit is connected to a DTS-compatible amplifier or
decoder using a digital audio cable, check the amplifier
settings, and that the cable is properly connected.
• If a TV or projector compatible with PCN only is con-
nected when HDMI is connected, DTS will not be
available.
Audio mix does not sound right or sounds incom-
plete (for example, inaudible dialog).
• Incorrect Setup menu settings.
Make sure that 2 Channel output is selected for the
Audio Out menu option if you've connected to the
stereo inputs on your amplifier or TV (pages 41-42).
• If the power is switched off before exiting the Setup
menu, the settings are not stored.
Make sure that you exit the Setup menu after changing
any settings before switching off.