Miele Platinum G 892 SC - Manual (Page 37)

What if … Possible fault Fix
the "Intake/Drain"
indicator flashes and the
program stops? The triple filter in the wash
cabinet is clogged. Clean the filter, see
maintenance instructions.
The drain pump or the
non-return valve may be
blocked. Clean the drain pump and
the non-return valve, see
maintenance instructions.
The drain hose is kinked. Remove the kink.
the "End", "Start/Stop"
and "Top Solo"
indicators flash at the
same time at the end of
a program? There may be a technical
fault. – Press the "Start/Stop"
button.
– Turn off the dishwasher.
A few seconds later:
– Turn the dishwasher on.
– Select the desired
program.
– Press the "Start/Stop"
button.
If the indicators flash
again, there is a technical
problem.
– Call the Miele Technical
Service Department.
Frequently asked questions
37