Miele ADVANTA G 1180 - Manual (Page 36)

Issue Possible fault Solution
Dishes are still
wet, glasses and
cutlery are
spotted. The rinse aid setting may
be too low, or the rinse aid
reservoir is empty. Increase the dosage, refill the
reservoir or switch the rinse
aid product when refilling, see
"Before using for the first time".
Dishes were taken out too
soon. Leave dishes in longer, see
"Use".
"2 in 1" products were used.
These products have a low
drying effect. Use powder detergent and
add rinse aid.
White residue is
visible on cutlery
and dishes.
clouding occurs
on glassware and
film can be wiped
off. Not enough rinse aid was
used. Increase the dosage, see
"Before using for the first time".
Unsuitable "2 in 1" or "3 in 1"
products were used. Use a different detergent,
normal tabs or normal powder
detergent.
Frequently asked questions
36