Motorola MICOM-2ES/2RS/2TS ALE - Manual (Page 59)

New ALE Features
4. Press MORE again to display the next page.
CALL
MOTOROLA
WILD SELF GRP ANY s
5. Press WILD (F1) to start.
CALL
WILD
MOTOROLA
SEND PAGE CHAN SEL s
6. Press SEL (F4).
WILD
_
MOTOROLA
? PAGE CHAN MONs
Note
If you try to send ( SEND (F1)) the call without first selecting an
address, your attempt is rejected and you see for a few seconds
NOT PROG.
7. Select the desired address:
• To insert a wildcard, press ? (F1).
• Enter the desired characters using the keypad
WILD
?135?
MOTOROLA
? <-- --> CLR
8. Confirm your selection by pressing ENTER.
CALL
?135?
MOTOROLA
SEND PAGE CHAN SEL s
9. Press PAGE (F2) if you want to attach a message to the call.
10. Press CHAN (F3) if you want to initiate the call on a specific channel.
11. Press SEND (F1) or ENTER to initiate the call.
Note
If the selected group does not include at least 2 stations, your
request is rejected and you will see for a few seconds the message
AT LEAST 2.
The radio now starts the process. During this process, you will see TO
alternating with the number of the channel on which the request is being sent.
Note
You can press STOP (F1) or ESC to abort the entire process.
_________________________________________________________________________________________________
45