Motorola PM400 - Manual (Page 46)

44
English
PHONE
EDIT THE PHONE LIST
Your radio contains a Phone list that holds up
to 25 phone numbers. You can edit the Phone
list in three ways through your radio’s menu:
• Add an entry
• Delete an entry
• Edit an existing entry
a. Press and release the preprogrammed
Speed Dial button.
b. Press the key (0 to 9) corresponding to
the number you want to call.
Note: To redial the last number dialed (if not
using Speed Dial), press and release
the PTT button immediately after the
access code is sent. The radio sends
the last number dialed.
– or –
If you entered your access code using
the DTMF keypad, press
G
once to
access the last number dialed; then
press and release the PTT button.
7 Press and release the PTT button, if required
for your radio.
8 Hold the microphone 1 to 2 inches (2.5 to
5 cm) away from your mouth. Press and hold
the PTT button to talk. Release the PTT but-
ton when the other party wants to talk, both
parties will need to speak in turn.
9 To disconnect a phone call, do one of the
following:
If your radio has Immediate Auto or Delayed
Auto programmed, go to step 10.
– or –
Enter the deaccess code using the DTMF
microphone keypad and press the PTT
button.
10 To exit Phone Mode:
Press the preprogrammed Phone button (see
page 18).
– or –
Press and hold
C to disconnect the call.
Note: D disappears from the display.
05_Phone.fm Page 44 Monday, August 2, 2004 3:22 PM