Miele W1986 - Manual (Page 11)

4. Select a spin speed
The default spin speed will
automatically be selected for each
program. However, you can adjust the
spin speed within the parameters listed
below:
^ Press the button until the indicator for
the desired spin speed lights.
Available spin
speeds
Program
max to high COTTONS
max to no spin WOOLENS, Jeans,
Starch, Fine rinse,
Drain/Spin
high to no spin PERMA PRESS,
Dress shirts
med to no spin DELICATES
low to no spin Silk
Special spin options
– Hold
Laundry is not spun and remains
soaking in water. This will prevent
wrinkles if the laundry is not removed
immediately at the end of the wash
program. When ready, select a spin
speed to continue the program. To
finish the program, press the "Door"
button.
– No spin
The laundry is not spun after the final
rinse, but the water is drained away.
After the drain cycle the washer goes
immediately into the anti-crease
cycle. Spinning between the rinses is
also omitted in this setting.
This option is not available in the
"COTTONS" program.
Using the washer
11