Motorola H3 User Manual
Before you begin, Charge your headset, Test and use
![background image](/manuals/121850/1/background.png)
1 - CHARGE YOUR
HEADSET
2 - PUT HEADSET
IN PAIR MODE
3 - PAIR PHONE
WITH HEADSET
4 - TEST AND USE
Get Connected in
4 Quick Steps
H3
Bluetooth®
Handsfree Headset
BEFORE YOU
BEGIN
1
Charge your headset's battery for 2 hours:
Plug the Motorola charger into the end of
the headset.
The blue indicator light turns on when the
battery is charging. It may take up to 1
minute for the light to turn on. When the
headset's battery is fully charged (about 2
hours), the blue indicator light turns off.
Unplug the charger from the headset.
1
2
Before using this product, read the Important Safety and
Legal Information pamphlet and follow its instructions.
CHARGE YOUR
HEADSET
Earhook
Your phone and headset are now paired and
ready to make and receive calls. To confirm
they are operating properly, make a call:
TEST AND USE
Place the headset over your ear. See
"Wearing the Headset" on the reverse side
of this guide.
On your phone, dial the number you want
to call and press the Send key.
If your phone and headset are successfully
paired, you will hear ringing on the headset.
4
1
2
USING YOUR H3
TROUBLESHOOTING
My phone does not find my headset.
Make sure the blue light on your headset is
steadily lit when your phone is searching for
devices (see step 2).
My headset worked before but now it's
not working.
Make sure your phone is on and the
Bluetooth feature is turned on in your phone
(see step 3). If the Bluetooth feature has
been turned off or was turned on only
temporarily, you may need to restart the
Bluetooth feature (see step 3). If you have
confirmed the Bluetooth feature is on in your
phone, pair your phone and headset again
(see step 3).
Support.
If you need more help, contact us at
1-877-MOTOBLU or visit us at
www.hellomoto.com/bluetooth and click
Support.
MOTOROLA and the Stylized M Logo are registered in the US
Patent & Trademark Office. The use of wireless devices and
their accessories may be prohibited or restricted in certain areas.
Always obey the laws and regulations on the use of these
products. The Bluetooth trademarks are owned by their
proprietor and used by Motorola, Inc. under license. All other
product or service names are the property of their respective
owners.
© Motorola, Inc. 2005.
Motorola, Inc.
Consumer Advocacy Office
1307 East Algonquin Road
Schaumburg, IL 60196
www.hellomoto.com
1-877-MOTOBLU
1-888-390-6456 (TTY/TDD United States for
hearing impaired)
Guide Number: 6809498A97-O
3
Take a moment before you get started to
familiarize yourself with your new
H3 Handsfree Headset
.
Volume
Buttons
Blue
Indicator
Light
Call
Button
Microphone
See Features and Functions Guide
on the reverse side
of this guide
for information on
using your H3.
After you have successfully paired your phone
and headset, you do not need to repeat these
initial setup steps each time you use the
headset.
When your headset and phone are successfully
paired, the blue light on your headset will
change from steadily lit to flashing.
Note: This procedure is for most Motorola phones. For other
phones, see your phone's user's guide or visit
www.hellomoto.com/bluetoothsupport and click Set Up My
New Product.
PUT YOUR HEADSET
IN PAIRING MODE
2
Call Button
With the headset power off, press and hold
the Call button for 6 to 10 seconds until the
blue indicator light turns on and remains
steadily lit.
Before you can use your headset, you must
pair (link) it with your phone.
Blue Indicator Light
Note: The blue light will flash as you press and hold the Call
button. Continue holding down the Call button until the blue
light is steadily lit.
Note: If you let go of the Call button before the blue light is
on and steady, ensure that your headset is off before trying
again.
Note: To turn off headset, see "Turning Headset On/Off" on
the reverse side of this guide.
Note: Headset is not functional while charging.
TURN ON BLUETOOTH
ON YOUR PHONE AND
PAIR WITH HEADSET
3
Select
(
Menu
)
> Settings > Connection >
Bluetooth Link > Setup.
Scroll to Power.
Press Change.
Select On.
Select Back.
Select Handsfree.
1
2
3
4
M
Your phone's Bluetooth feature is off by
default. To use your headset, turn on the
Bluetooth feature in your phone.
To turn on Bluetooth:
Start Here > > >
Select [Look for Devices].
Note: Do not select STOP--you will automatically be
taken to the next screen.
Select Motorola H3.
Select Yes to bond.
Enter the passkey 0000 and select OK.
TURN ON BLUETOOTH
ON YOUR PHONE AND
PAIR WITH HEADSET
Continued
5
6
7
8
9
10