Medela Classic Breastpump User Manual

Page 10

background image

1

14

4

Set the suction regulator

on the breastpump to

MINIMUM.

1

15

5

Center breastshield(s) over

your nipple(s). Switch on the

Classic Breastpump. Once

pumping begins, you may

adjust the vacuum of the

breastpump to meet your

personal comfort level.

Important Note: If you experience discomfort, contact your

lactation professional as you may need a larger breastshield

or other lactation advice.

To locate a Breastfeeding Specialist in your area,

call 1-800-TELL YOU.

9

9

Connect the angled piece from

the breastpump onto the

barrier/ filter.

1

10

0

Push the ends of the tubing

into the small round openings

in the backs of the breast-

shields. (Location varies by

breastshield used.)

1

11

1

Grasp the yellow ends of the

tubing. Align and push into

each of the openings on the

pump connector.

1

12

2

To double pump:

Turn the pumping ring

to point between the tubing.

The ring will also point to the

double pumping symbol.

1

13

3

To single pump:

Turn the pumping ring to

point at the desired tubing.

The ring will also point to the

single pumping symbol.

17

16

This manual is related to the following products: