Marantz PM5004 - Manual (Page 11)

8
ENGLISH
Connecting the power cord
Wait until all connections have been completed before connecting the
power cord.
To household power outlet
(AC 120 V, 60 Hz)
Power cord
(supplied)
Power cords of other AV
equipment
NOTE
• Insert the plugs securely. Loose connections will result in the
generation of noise.
• Do not use any cord other than the provided power cord.
n Connection to the AC outlet
You can use the AC outlets of this unit to supply power to other
AV equipment.
This unit is equipped with “SWITCHED” and “UNSWITCHED” AC
outlets.
SWITCHED (Interlocked operation)
The “SWITCHED” AC outlet turns on/off the power supply in sync
with power on/standby of this unit.
You can connect AV equipment that has total power consumption of
up to 120 W (1A).
UNSWITCHED (Non-interlocked operation)
The “UNSWITCHED” AC outlet supplies power regardless of power
on/standby of this unit.
You can connect AV equipment that has maximum power consumption
of up to 120 W (1A).
WARNING :
Do not connect AV equipment exceeding the absolute allowable
power. If you do, it could result in fi re or electric shock.
NOTE
Only use the AC outlet to plug in audio equipment. Do not use it as a
power supply for hairdryers or anything other than audio equipment.
Basic operation
Button located on both the main unit and
the remote control
BUTTON
Button only on the main unit Button only on the remote control [BUTTON]Symbols used to indicate buttons in this manualVOLUMESOURCE DIRECT [POWER OFF][POWER ON]VOLUME[INPUTd,f]SOURCE DIRECT[MUTE] Before use1Turn the VOLUME all the way down.2Set , and to the center positions. Turning the power onPress .• Power is turned on.
• Input indicator for the selected source lights.
• The unit will be ready to start playback after several seconds.Turning the power standbyPress [POWER OFF].• The power is set to the standby mode.
• The Power indicator lights in red.• Press[POWER ON] to turn on power from standby mode.• You can also turn on power by using either or [INPUT d,f] from standby mode.NOTEPower continues to be supplied to some of the circuitry even when the
power is in the standby mode. When leaving home for long periods of
time or when going on vacation, either press to turn off the power, or unplug the power cord from the power outlet.Turning the power offPress .• Power is turned off.
• All indicators will turn off.Power indicatorPHONES jackInput indicators
Button only on the remote control [BUTTON]
Symbols used to indicate buttons in this manual
VOLUME SOURCE DIRECT
[POWER OFF]
[POWER ON]
VOLUME [INPUTd,f]
SOURCE DIRECT
[MUTE]
Before use
1 Turn the VOLUME all the way down.
2 Set , and to the
center positions.
Turning the power on
Press .
• Power is turned on.
• Input indicator for the selected source lights.
• The unit will be ready to start playback after several seconds.
Turning the power standby
Press [POWER OFF] .
• The power is set to the standby mode.
• The Power indicator lights in red.
• Press [POWER ON] to turn on power from standby mode.
• You can also turn on power by using either or
[INPUT d , f ] from standby mode.
NOTE
Power continues to be supplied to some of the circuitry even when the
power is in the standby mode. When leaving home for long periods of
time or when going on vacation, either press
to turn off the
power, or unplug the power cord from the power outlet.
Turning the power off
Press .
• Power is turned off.
• All indicators will turn off.
Power
indicator
PHONES
jack
Input
indicators