Motorola CM300TM - Manual (Page 23)

21
English
GE
TTIN
G STA
R
TED
VOX OPERATION
When hands-free operation is desired, your
radio can transmit by voice alone using the
VOX feature when you speak through a voice
activated external microphone that is
connected to your radio.
Note: A voice activated external microphone
must be connected to your radio prior
to power-up of the radio in order to
activate the VOX feature.
To enable or disable VOX operation on a
channel, press the preprogrammed VOX
button (see page 14).
Note: Pressing the PTT button disables VOX.
– or –
You can select channels to enable or disable
VOX as preprogrammed by your dealer/
programmer.
PROGRAM PL/DPL CODES
Use this feature to edit the Private-Line/Digital
Private-Line codes for a selected channel.
1 G
or
H
to select a channel that has been
preprogrammed to enable VOX.
Note: Pressing the PTT button disables
VOX.
2
G
or
H
to select a channel that has not
been preprogrammed to disable VOX.
1
D
to enter menu mode.
2
G
or
H
until
3
D
to select
4
G
or
H
until
– or – until
5
D
to select the current setting.
6
G
or
H
to scroll through the standard TPL
frequencies or DPL codes.
– or –
Enter a non-standard or standard 4-digit TPL
frequency or the 3-digit octal code (numbers
0-7 only) for DPL via the DTMF microphone
keypad.
7
D
to confirm selection.
8
C
until you exit menu mode.
EDIT PL
EDIT PL
RX XXX . X
TX XXX . X
02_GetStarted.fm Page 21 Friday, July 11, 2003 11:03 AM