Moxa Technologies 2140 - Manual (Page 62)

Stop information dumping
Typing “stop” will halt the dumping of debug information and the digital input status.
Query status of digital inputs
Typing “diquery” will display the status of all digital inputs once.
Set digital outputs
To set digital output to connect NO with COMMON, type “DO1=L”.
To set digital output to connect NC with COMMON, type “DO1=H”.
Erase snapshots stored in Flash memory
Typing “erase image” will clear all snapshots saved in Flash memory.
Skip installation at next boot
Typing “lock” will inform Video Server to lock the current network settings. You won’t need to
go through the installation procedure the next time the Video Server boots up.
Reset network for new settings
Typing “unlock” will cause Video Server to wait for the installation procedure the next time it
boots up.
Restore factory default settings
Typing “clear” will make Video Server restore factory settings but not restart. To validate new
settings, type “reset” to make the system restart.
Reset system
Typing “reset” will make Video Server perform a software reset.
VPort 2140 User’s Manual 4-28