Playback using the cue function, Erasing the cue point, Beginning playback from the cue point – Marantz PMD330 User Manual
Page 17
13
ENGLISH
FRANCAIS
DEUTSCH
NEDERLANDS
ESP
ANOL
IT
ALINO
POR
T
UGUES
SVENSKA
D
ANSK
D
ANSK
SVENSKA
POR
TUGUES
IT
ALINO
ESP
ANOL
NEDERLANDS
DEUTSCH
FRANCAIS
ENGLISH
Erasing the CUE Point
Procedure
(Erase)
1.
Press the button !3 to stop playback, and then press the
button !3 again to erase the cue point. If the cue point is
erased, the
CUE
button !5 turns off.
Note:
The CUE point is also erased if you press the button
y
to
open the disc tray
w
, or if you press the POWER switch
q
and turn the CD player off.
Resetting the CUE Point
Repeat the procedure described on
page 12
in “Setting the
CUE Point,” starting from step 1.
If the CD player is kept in the paused state for an extended
Period of time
If the CD player is left in the paused state for an extended
period of time without performing any operations, it automati-
cally enters the “auto standby” state.
In the auto standby state, the disc stops and “Standby” is indi-
cated on the display.
To release the CD player from the auto standby state, press
the
button !7 .
When you press the
button !7 , the CD player searches for
the position that it was at previously and then pauses.
If you press the
CUE
button !5 while the CD player is in the
auto standby state, it searches for the CUE point and then
pauses there.
Tip:
The amount of time the unit waits before if enters the “auto
standby” state can be selected in the preset menu: 30 minutes
(initial value), 20 minutes, 10 minutes, or 30 seconds.
Playback Using the CUE Function
SEARCH
Press
Press
PLAY
DISC
PAUSE
CUE
Point
ENTER
Beginning playback from the CUE point
Procedure
(Playback)
1.
Press the
CUE
button !5.
The CD player immediately moves to the CUE point, and
pauses there.
2.
Press the
button !7. Playback starts from the CUE
point.
PMD331/PMD340 only:
If the CD player is in the paused state and the
button !7 is
pressed, playback from the CUE point starts without any delay.
This function is called “Instant Start.”
Tip:
It is easy to return to the CUE point after the point has been set.
The concept of CUE play is illustrated below.
CLEAR
CLEAR