Miele NOVOTRONIC G 841 SC PLUS - Manual (Page 34)

With the aid of the following guide, minor problems can be fixed without a service
call.
,
Repairs should only be carried out by a qualified and trained person in ac-
cordance with local and national safety regulations. Unauthorized repairs could
cause personal injury or machine damage.
What if … Possible fault Fix
the dishwasher does not
start? The door is not properly
closed. Close the door firmly.
The machine is not
plugged in. Insert the plug.
The fuse is defective or
the breaker has tripped. Reset the circuit breaker.
Make sure it is a 15 A
breaker.
the dishwasher does not
start, after pressing the
"Start" button and
the "Start" indicator
flashes? The program selector is
set to "Stop". – Turn the program selec-
tor to the desired pro-
gram.
– Press the "Start" button.
the dishwasher stops
during a program? The fuse or breaker has
tripped. Reset the circuit breaker.
Make sure it is a 15 A
breaker.
the "Intake/Drain" indi-
cator is lit or flashing
and the dishwasher may
have stopped? The water valve is closed. Open the water valve.
The filter in the water inlet
is blocked. See maintenance instruc-
tions.
The flow pressure at the
water inlet is less than
4.5 psi (0.3 bar). Contact a plumber.
The waterproof system
has activated. Call the Miele Technical
Service Department.
Frequently asked questions
34