Marantz PMD620MKII - Manual (Page 80)

68
7.
Press the VOL + or VOL – button to select other Menu
choices. When changing the Preset is complete, press the
DISPLAY button to store the changes, or press the STOP/
CANCEL button to exit Menu mode without storing any
changes.
Note:
If you have forgotten the passcode, you can change it to “0000” by restoring
the PMD620MKII to the factory defaults. (
v P.79)
21. SP Mute
When “SP Mute” is set to On, the sound being recorded is not
output from the speaker. When set to Off, the sound is output
from the speaker except when the sound is being recorded by
the built-in microphone.
1.
From Stop, press and hold the DISPLAY button for one
second.
2.
Press the VOL + or VOL – button to select Preset Menu. Then
press the 1/3/ENTER button to accept.
3.
Press the VOL + or VOL – button to select Preset 1, 2, 3 or
renamed Preset. Then press the 1/3/ENTER button to accept
the selected Preset.
4.
Press the VOL + or VOL – button to select “Edit” and press the
1/3/ENTER button to accept.
5.
Press the VOL + or VOL – button to select the SP Mute item.
Then press the 8 or 9 button to tab through the SP Mute
choices (On or Off).
6.
Press the VOL + or VOL – button to select other Menu
choices. When changing the Preset is complete, press the
DISPLAY button to store the changes, or press the STOP/
CANCEL button to exit Menu mode without storing any
changes.