Motorola SYMBOL MINISCAN MSXX04 - Manual (Page 203)

Parameter Menus 10 - 97
Decode Data Packet Format
Parameter # EEh
This parameter selects whether decoded data is transmitted in raw format (unpacketed), or transmitted with the
packet format as defined by the serial protocol.
If the raw format is chosen, ACK/NAK handshaking is automatically disabled for decode data.
*Send Raw Decode Data
(00h)
Send Packeted Decode Data
(01h)
Stop Bit Select
Parameter # 9Dh
The stop bit(s) at the end of each transmitted character marks the end of transmission of one character and
prepares the receiving (host) device for the next character in the serial data stream. Set the number of stop bits
(one or two) to match host device requirements.
*1 Stop Bit
(01h)
2 Stop Bits
(02h)