Miele TOUCHTRONIC PREMIER PLUS HG01 - Manual (Page 40)

What if … Possible fault Fix
the "Drain" indicator
flashes, the program
stops? The triple filter in the wash
cabinet is clogged. Clean the filter, see main-
tenance instructions.
The drain pump or the
non-return valve may be
blocked. Clean the drain pump and
the non-return valve, see
maintenance instructions.
The drain hose is kinked. Remove the kink.
three horizontal bars
- - - appear in the time
display at the end of a
program? There may be a technical
fault. – Turn off the dishwasher.
A few seconds later:
– Turn on the dishwasher.
– Select the program.
– Press the "Start/Stop"
button.
If the horizontal bars ap-
pear again at the end of
the program, there is a
technical problem.
– Call the Miele Technical
Service Department.
Frequently asked questions
40