Miele G 5575 - Manual (Page 36)

At the end of a program
At the end of a program, the optical
interface flashes slowly when the door
is closed. It will stop 10 minutes after
the end of the program.
^ Open the door.
The message O End will appear in the
display.
In the "Express" program, the drying
fan will run for a few minutes after
the program is completed.
Dishes tends to chip if removed still hot
from the dishwasher.
Let the dishware cool.
To avoid steam damage to the
counter top, open the door after the
end of the program either fully or
keep it closed until you are removing
all the dishes.
^ Unload the dishwasher.
Dishes tend to break and chip more
easily when they are hot.
Allow the dishes to cool until they are
comfortable enough to handle before
unloading them.
If you open the door fully after switching
off, the dishes will cool much faster.
Unloading the lower basket first will
prevent water drops from the upper
basket and cutlery tray (depending on
model) from dropping onto dishes in
the lower basket.
^ Press the K button to turn the
dishwasher off.
The dishwasher continues to use
electricity until turned off with the
K
button.
Preparing your appliance for
an extended vacation
If you elect to turn off the water to your
home for an extended period of time,
please note that this may not be
enough to reduce the risk of a leak.
To be completely safe, you must
turn off the water supply to each
individual appliance. This means
under the sink for a dishwasher, at
the laundry bib for your washer, etc.
Use
36