Motorola ML910 - Manual (Page 109)

BIOS Setup Utility & MLUA 5-15
ML Administrator Application (MLAA)
This application is designed for an administrator to configure the parameters of various functions in
the notebook. By using these configuration parameters, you can change the default configuration
that automatically loads when you turn on the computer.
Every time you start the ML Administrator Application, the current configuration parameters saved
in the Embedded Controller (EC) are loaded and displayed in the ML Administrator Application
window, as illustrated in the following example.
The MLAA application needs to be installed before the parameters can be viewed (via on-line help)
or changed. The installer can be found on the hard drive at C:\Driver\ML Applications\MLAA\. It
can also be found on the Drivers DVD under the ML Applications folder.
For specific details on this application and the various parameters that can be adjusted, please
refer to the on-line help for the application.
CAUTION:
It is recommended that any changes made using the MLAA application be performed by a System
Administrator.
Standard Operations
Below is the list of standard operations you can perform using the ML Administrator
Application:
z
Read From EC – to read configuration parameters from EC.
z
Read From File – to retrieve configuration parameters from a file.
z
Write To EC – to write configuration parameters to EC.
z
Save To File – to save configuration parameters to a file.