Miele G 4500 - Manual (Page 33)

,
Repairs should only be carried out by a qualified and trained person in
accordance with local and national safety regulations. Unauthorized repairs
could cause personal injury or machine damage.
Technical faults
Problem Possible fault Solution
The Start / Stop
indicator does not flash
after the dishwasher is
turned on with "
s".
The machine is not
plugged in. Insert the plug.
The fuse has tripped. Reset the circuit breaker.
See data plate for
minimum amperage.
The dishwasher stops
during a program. The fuse has tripped. Reset the circuit breaker.
See data plate for
minimum amperage.
The program cycle
indicators "Cleaning",
"Drying" and "End"
flash at the same time. There may be a technical
fault. – Turn the dishwasher off
"
s".
After a few seconds:
– Turn the dishwasher on
"
s".
– Select the desired
program with the
"Program" button.
– Press the "Start / Stop"
button.
If the problem persists,
contact Technical Ser-
vice.
The drain pump is
running when the door
is open. The waterproof system
has activated. – Turn off the water
supply.
– Contact Miele
Technical Service.
Frequently asked questions
33