beautypg.com

Configuration and installation, Mounting the bha-100, Configuring the bha-100 – Motorola Broadband House Amplifier BHA-100K/P-R User Manual

Page 16

background image

Section 3

Configuration and Installation

This section provides information to configure and install the BHA-100*, including instructions

to:

„

Mount the BHA-100*

„

Configure the BHA-100* (add accessories)

„

Connect and supply power to the BHA-100*

„

Adjust the output level and slope

„

Install the return amplifier kit

Mounting the BHA-100*

The BHA-100* should be mounted on a flat surface and be positioned vertically. This position

results in maximum air flow and the lowest operating temperature. When mounting the

BHA-100*, choose a location protected from the weather, with available power in close

proximity. The BHA-100* should be mounted flush with the wall using appropriate mounting

hardware (not provided with the unit).

Configuring the BHA-100*

To put the BHA-100* into service, the following areas require attention:

„

Power connections

„

Cable equalizer and input pad selection and installation

„

Return amplifier installation

BHA-100* Broadband House Amplifier Installation Manual

This manual is related to the following products: