Grindmaster 10 - Manual (Page 3)

Grind ’n Brew Coffee Systems Page 2
English
WARNING LABELS
The following warning labels were on your grinderbrewer when it shipped from the factory. They should remain
on your grinderbrewer in good, readable condition at all times. If one of your labels is missing or damaged,
order a replacement label immediately.
Part# 71104
Located on outside back, grinderbrewer casing
WARNING
• USE ONLY ON A CIRCUIT THAT IS PROPERLY
PROTECTED AND CAPABLE OF THE RATED LOAD.
• ELECTRICALLY GROUND THE CHASSIS
• DO NOT DEFORM PLUG OR CORD
• FOLLOW NATIONAL AND LOCAL ELECTRICAL CODES
• WATER CONNECTIONS SHALL COMPLY WITH THE PLUMBING CODE OF
BOCA & THE FOOD SERVICE SANITATION MANUAL OF THE FDA
• DO NOT USE NEAR COMBUSTIBLES
• FAILURE TO COMPLY RISKS PERSONAL INJURY, DAMAGE TO
EQUIPMENT, FIRE OR SHOCK HAZARD
• READ THE ENTIRE OPERATING MANUAL INCLUDING THE LIMIT OF
WARRANTY AND LIABILITY BEFORE BUYING OR USING THIS PRODUCT
• ALWAYS UNPLUG UNIT FROM POWER SUPPLY BEFORE SERVICING
Technical Data - Export Models
MODEL 10HE 11HE 20HE 21HE
PART # 70929 70913 70931 70915
VOLTAGE 230 230 230 230
FREQUENCY 50/60 Hz 50/60 Hz 50/60 Hz 50/60 Hz
WATTS 3270 3360 3270 3360
CIRCUIT BREAKER 20 20 20 20
NO. OF HOPPERS 1 1 2 2
HOPPER CAPACITY/HOPPER 2,5 kg 2,5 kg 3 kg 3 kg
BREW CAPACITY 1,9 L 1,9 L 1,9 L 1,9 L
NO. OF WARMERS 1 1
FEATURES :
GRIND’N BREW x x x x
GRIND ONLY x x x x
BREW ONLY x x x x
HALF BREW x x x x
PAINTED CASING
STAINLESS CASING
x x x x
OUTLET FOR WARMERS
DIMENSIONS :
WIDTH (cm) 23,5 23,5 23,8 23,8
DEPTH (cm) 61,6 61,6 61,6 61,6
HEIGHT (cm) *78,8 66,7 *95,25 83,2
WEIGHT (kg) 29 kg 29 kg 36 kg 36 kg
SHIPPING WEIGHT (kg) 36,3 36,3 43,1 43,1
* BASED ON 5" LEG HEIGHT
** INCLUDING WATER INLET FITTING
Part # 61497
Located on front of grinderbrewer casing
OPGELET! HETE VLOEISTOFFEN EN OPPERVLAKKEN