Go-Video DVD 22 - Manual (Page 24)

PLAYING DVDs and CDs
Using the On-Screen Status Display
When a DVD or CD is playing, you may press the
Status Button
x at any time to view a quick
summary of the disc’s playback status. The Status Bar
not only gives you a snapshot of the unit’s current
state; it also provides an easy way to select a different
title, chapter or time display.
For DVDs:
• Title ƒ: This display shows the current title.
• Chapter ©: This display shows the current
chapter.
• Playback Status ˙: This section shows whether
the unit is in Play or Pause, or whether it is in a fast
or slow search/scan mode.
• Time Display Type î: This section identifies the
type of information in the Time Display ¬ section
of the display.
• Options ∆: This line is blank when the Status
Display is first accessed, but when it is used to
change the title, chapter or time display, the available
choices will be shown here.
• Time Bar ˚: This display is a graphic representa-
tion of the time remaining for the disc being played.
As the disc plays, blue bars will appear to give a
relative indication of where the current scene is
between the beginning and end of the title.
• Time Display ¬: This section of the display shows
the time corresponding to the type of display indi-
cated in the Time Display Type
î.
When a CD is playing, the Title and Chapter lines are
replaced by a single line that shows the current Track
being played.
Selecting a Title (for DVDs)
To select a title, first press the Status Button N so
that the Status Display appears. The Current Title ƒ
will be highlighted in a blue box. Press the Enter
Button
P and a list of the available titles will appear
in the Options Line ∆. Use the ‹ › Navigation
Buttons 4 to select the desired title in a highlighted
blue box and press the Enter Button P to begin
playing the new title. Note that if a “ø” icon appears
when you attempt to select a new title, this is an indi-
cation that the disc does not allow the title to be
changed in this manner even though a list of title num-
bers will appear. This is a function of the way the disc
was created and is not a flaw in the DVD 22.
Selecting a Chapter (for DVDs)
To select a chapter, first press the Status Button N
so that the Status Display appears. Next, press the ›
Navigation Buttons 4 so that the Current
Chapter Number © is highlighted in a blue box.
Press the Enter Button
P and a list of the available
chapters will appear in the Options Line ∆. Use the
‹› Navigation Buttons 4 to select the desired
chapter in a highlighted blue box and press the Enter
Button
P to begin playing the new chapter.
To select a specific chapter on a DVD at any time dur-
ing playback, simply press the number corresponding
to the chapter you wish to view using the Numeric
Keys
F. You may also move one by one through
the chapters at any time by pressing the Previous
Step/Next Step Buttons
8M on the remote or
the Skip Reverse/Skip Forward Buttons 67 on
the front panel.
Selecting a Track (for CDs)
To select a track, first press the Status Button
N
so that the Status Display appears. Next, press the
‹ › Navigation Buttons
4 so that the Track
Number © is highlighted in a blue box. Press the
Enter Button P and a list of the available tracks
will appear in the Options Line ∆. Use the ‹ ›
Navigation Buttons 4 to select the desired track
in a highlighted blue box and press the Enter Button
P to begin playing the new chapter.
To select a specific track on a CD at any time during
playback, simply press the number corresponding to
the track you wish to listen to using the Numeric
Keys
F. You may also move one by one through
the chapters at any time by pressing the Previous
Step/Next Step Buttons
8M on the remote or
the Skip Reverse/Skip Forward Buttons 67 on
the front panel. When you press the Previous Step
8 or Skip Reverse 6 button once, the player will
return to the start of the current track. Additional
presses of the buttons will step back through the
available tracks, one at a time.
Changing the Time Display
To change the Time Display, first press the Status
Button
D so that the Status Display appears. Next,
press the ‹ › Navigation Buttons 4 so that the
current Time Display Type î is highlighted in a
blue box. Press the Enter Button P and a list of
the available time display options will appear in the
Options Line
∆.
For DVDs:
• Title Elapsed shows the time elapsed in the current
title. In cases where the disc has only one title, this
will be the same as the elapsed time on the disc.
• Title Remaining shows the time remaining in the
current title. In cases where the disc has only one
title, this will be the same as the time remaining on
the disc.
• Chapter Elapsed shows the time remaining in the
current chapter.
• Chapter Remaining shows the time remaining in
the current chapter.
For CDs:
• Track Elapsed shows the time elapsed in the
current track.
• Track Remaining shows the time remaining in the
current track.
• Disc Elapsed shows the time elapsed on the total
disc.
• Disc Remaining shows the time remaining in the
total disc.
Press the ‹ › Navigation Buttons 4 to highlight
the desired time display method and press the Enter
Button
P to change the display. Note that any
changes made here will affect the time display in both
the Status Display and the front-panel Information
Display
@.
NOTE: When a CD, MP3 or Windows Media disc is
playing, the On-Screen Status Display will not be
available. Instead, the PLAYER Menu of the OSD
system will appear on-screen. (See page 28 for more
information on using the Player Menu.)
For JPEG discs, the File Index number and File Name
will be displayed; however, you will not be able to
change them. To navigate a JPEG disc, you must use
the Player Menu of the OSD system (see page 28).
Selecting the Audio Track (DVDs Only)
Many DVDs contain more than one audio track. On
many discs, you will find multiple languages, while
others will offer a choice of different audio formats
or mixes (e.g., Dolby Digital or DTS), while some will
also contain commentary from the director or stars or
Descriptive Video Service content. The default audio
language is set in the AUDIO SETUP menu
as shown on page 18.
To change the audio track, press the Audio Select
Button
2 to show the current audio track configu-
ration. When you press the Enter Button P, a
series of numbers will appear. Press the ‹ ›
Navigation Buttons
4 to change the numeric indi-
cation while noting that a description of the available
options appears at the top left corner of the on-screen
display. When your desired selection appears, press
the Enter Button
P and then press the ‹ ›
Navigation Buttons 4 so that DONE is high-
lighted and then press the Enter Button P again to
remove the on-screen display and return to normal
playback.
24 PLAYING DVDs AND CDs