beautypg.com

Special features 13 – Go-Video R 6640 User Manual

Page 14

background image

Special features

13

The digital input connector, known as a 'firewire' or 'IEEE1394', is used to
transmit digital broadband signals commonly used by digital video camcorders.
Audio and video signals are transmitted using a special firewire cable. In
addition to DVD and Hi8 camcorders, PCs with digital video outputs can be
connected to this digital input.

MP3 files are highly compressed music files, which compress standard CD
audio files to ~1/10 of their original size. As a result, up to 10 hours of music
can be stored on a single CD.

Progressive Scan creates a picture with twice the scan lines of traditional
Component Video. This results in reduced picture flickering and motion
artifacts as well as a sharper image on large screens.

The DVD recorder can play both pre-recorded DVDs and CDs. DVDs recorded
using this DVD recorder can be played on most current and future DVD players.

Dolby Digital is a standard developed by Dolby Laboratories for transmitting
from 1 to 5 full-range channels as well as a low frequency (.1) channel for a
total of 5.1 discrete channels. The loudspeakers are arranged as follows: front,
left, front middle, front right, rear left and rear right. Dolby Digital is currently
the most common system and is often used in cinemas.

TM

DoMiNoFX is a patented video processing technology that digitally
enhances and refines the picture quality during recording. This results in
visibly superior recordings, and a dramatic improvement when recording
from noisy source material, such as VHS tapes or weak TV signals.

This product contains copy protection technology, which is protected by US
Patent Nos. 4631603, 4577216, 4819098 and 4907093 and other intellectual
property rights. Use of this copy protection technology from Macrovision
Corporation requires the approval of Macrovision. It is intended exclusively
for home use and other limited pay-per-view applications, unless Macrovision
approves some other use in writing.Modifications to the equipment, removal
of components and reverse engineering are prohibited.