Startup, Setting up the vcr – GE VG4258 User Manual
Page 10
Setting Up the VCR
Startup
8
CHANNELS
1 Auto Channel Search
2 Add/Remove Channels
3 Signal Type: ANTENNA
4 VCR Plus+ Channel List
5 Cable Box Setup
0 Exit
5. Select the language/Seleccione el idioma/
Sélectionner la langue.
The VCR displays the on-screen menus in the English, Spanish
or French language. The word ÒLanguageÓ cycles through the
different languages when the VCR Main Menu is displayed on
the TV screen. The arrow indicates which language is selected.
A
. Press
MENU
on remote to display the
VCR MAIN
MENU
.
B
. Press
7
to display the
LANGUAGE
or
IDIOMA
or
LANGUE
menu. (English:
LANGUAGE
; Spanish:
IDIOMA
; French:
LANGUE
).
¥ Press 1 to have the menus displayed in English (Ingles).
¥ Press 2 to have the menus displayed in Spanish
(Espa–ol).
¥ Press 3 to have the menus displayed in French
(Fran•ais).
6. Place channels in the VCR’s memory.
The
AUTO CHANNEL SEARCH
feature memorizes the channel
list available through your signal typeÑcable or antenna. The
signal type is automatically selected when you auto channel
search. Also, if you change your signal system, you must
perform
AUTO CHANNEL SEARCH
again.
Wait until the channel numbers stop changing. This takes
about one to two minutes. The TV tunes to the lowest channel
found. Pressing
CHANNEL
up or down selects only the active
channels.
A
. Press
MENU
to display the
VCR MAIN MENU
on the TV
screen. If this menu does not appear:
¥ Make sure the TV is tuned to same channel as the
CH 3/4
switch on the VCR or the TVÕs video input (refer to TVÕs
manual).
¥ If you use a basic hookup, check the
VCR
indicator in
display panel Ñ it should be on. Press
TV•VCR
to turn
it on.
¥ Check the connections.
B
. Press
4
to display the
CHANNELS
menu.
C
. Press
1
to begin
AUTO CHANNEL SEARCH
.
The VCR automatically selects the
CABLE
(cable TV) or
ANTENNA
signal. For cable connection, 125 channels are
searched; for an antenna connection, 69 channels are
searched.
To change the Signal Type:
A
. Follow steps A-B above.
B
. Press
3
to switch the
Signal Type
between
CABLE
and
ANTENNA
.
VCR MAIN MENU
1 VCR Plus+
2 Timer Recordings
3 Set Clock
4 Channels
5 Preferences
6 Audio
7 Language
LANGUAG
Select a language.
1➛English
2 Espa
ñ
ol
3 Fran
ç
ais
Press MENU to continue
VCR MAIN MENU
1 VCR Plus+
2 Timer Recordings
3 Set Clock
4 Channels
5 Preferences
6 Audio
7 Language
0 Exit
AUTO CHANNEL SEARCH
Now scanning channel 14
Press any key to cancel