Greenway Home Products MEF2021WL - Manual (Page 3)

gET REady To sTaRT
Before assembly, use scissors to unwrap the parts from the packaging. DO NOT use a box cutter or exacto-knife as
you may cut into the mantel pieces inside the box and damage the finish. Check for the hardware bag which is RED and
located inside the packaging, taped to the top box. Be sure you DO NOT discard any pieces.
step 1
Locate the base and place it on the floor. Do not put it up against he wall at this
point in the assembly, as you need to get in behind he mantel.
step 2
Locate the left side panel and the left front panel. Facing the front of the base, take
the left side panel, positioning it so the holes in the blocks on the bottom line up
with the holes on the base. Position the left front panel next to the left side panel,
lining up the holes in the blocks with the holes on the base. Attach the left front
and side panel to the base by inserting and tightening 1 flat head screw to each
piece. Attach the left side and front panels together by inserting and tightening 3
flat head screws.
step 3
Repeat Step 2, but with the right side panel and the right front panel.
step 4
Locate the central header that will be attached to the left and right legs and will sit
above the firebox. Position this panel with the finished side facing the front of the
mantel. Line up the holes on each side and insert and tighten 2 flat head screws on
each side.
step 5
Get your assistant and locate the top of your mantel. This top is very heavy. It will
take 2 people to lift and position it in place. Ensure the top goes over the positioning
guide located on the header. The top must go over this guide to be positioned
correctly. Line up the holes on the top of the mantel, insert and tighten 4 flat head
screws.
2
FLAT HEAD SCREW(4*25mm)19PCS
1
2
3
4
5
6
1
1
1
1
1
1
RIGHT SIDE PANEL
MEF2021WL MODEL
ITEM NAME
PART NO.
MANTEL
PART NAME QTY.
BASE
CENTRAL HEADER
RIGHT FRONT PANEL
LEFT SIDE PANEL
LEFT FRONT PANEL
7 1 TOP
RIGHT SIDE PANEL
BASE
CENTRAL HEADER
RIGHT FRONT PANEL
LEFT SIDE PANEL
LEFT FRONT PANEL
TOP
1
2
4
5
7
6
3
825
800
240
225
924
75
476
610
MEF2021WL
2PCS 2PCS
4PCS
FLAT HEAD SCREW(4*30mm)4PCS
FLAT HEAD SCREW(4*16mm)4PCS
FLAT HEAD SCREW(4*25mm)19PCS
1
2
3
4
5
6
1
1
1
1
1
1
RIGHT SIDE PANEL
MEF2021WL MODEL
ITEM NAME
PART NO.
MANTEL
PART NAME QTY.
BASE
CENTRAL HEADER
RIGHT FRONT PANEL
LEFT SIDE PANEL
LEFT FRONT PANEL
7 1 TOP
RIGHT SIDE PANEL
BASE
CENTRAL HEADER
RIGHT FRONT PANEL
LEFT SIDE PANEL
LEFT FRONT PANEL
TOP
1
2
4
5
7
6
3
825
800
240
225
924
75
476
610
MEF2021WL
2PCS 2PCS
4PCS
FLAT HEAD SCREW(4*30mm)4PCS
FLAT HEAD SCREW(4*16mm)4PCS
FLAT HEAD SCREW(4*25mm)19PCS
1
2
3
4
5
6
1
1
1
1
1
1
RIGHT SIDE PANEL
MEF2021WL MODEL
ITEM NAME
PART NO.
MANTEL
PART NAME QTY.
BASE
CENTRAL HEADER
RIGHT FRONT PANEL
LEFT SIDE PANEL
LEFT FRONT PANEL
7 1 TOP
RIGHT SIDE PANEL
BASE
CENTRAL HEADER
RIGHT FRONT PANEL
LEFT SIDE PANEL
LEFT FRONT PANEL
TOP
1
2
4
5
7
6
3
825
800
240
225
924
75
476
610
MEF2021WL
2PCS 2PCS
4PCS
FLAT HEAD SCREW(4*30mm)4PCS
FLAT HEAD SCREW(4*16mm)4PCS
FLAT HEAD SCREW(4*25mm)19PCS
1
2
3
4
5
6
1
1
1
1
1
1
RIGHT SIDE PANEL
MEF2021WL MODEL
ITEM NAME
PART NO.
MANTEL
PART NAME QTY.
BASE
CENTRAL HEADER
RIGHT FRONT PANEL
LEFT SIDE PANEL
LEFT FRONT PANEL
7 1 TOP
RIGHT SIDE PANEL
BASE
CENTRAL HEADER
RIGHT FRONT PANEL
LEFT SIDE PANEL
LEFT FRONT PANEL
TOP
1
2
4
5
7
6
3
825
800
240
225
924
75
476
610
MEF2021WL
2PCS 2PCS
4PCS
FLAT HEAD SCREW(4*30mm)4PCS
FLAT HEAD SCREW(4*16mm)4PCS
Step 1
Step 2 & 3
Step 4
Step 5