Graco FR60 - Manual (Page 13)

FR60 Owner’s Manual 7
Getting Started
Sending Workout Data to
Your Computer
nOTE: You must download
software as instructed so that
the necessary USB drivers are
installed before connecting the
USB ANT Stick to your computer.
1. Plug the USB ANT Stick into
an available USB port on your
computer.
2. Bring your FR60 within range
(5 m) of your computer.
nOTE: If Power Save Transfer is
activated, your FR60 must be in
regular time mode to transfer data
to your computer. See page 24 .
3. Follow the on-screen instructions.
Using the Heart Rate
Monitor
The heart rate monitor is on standby
and ready to send data. Wear the
heart rate monitor directly on your
skin, just below your breastplate.
It should be snug enough to stay in
place during your activity.
Tab
Heart Rate Monitor Strap
Heart Rate Monitor (Back)
Electrodes
Heart Rate Monitor (Front)
Slot
1. Push one tab on the strap through
the slot in the heart rate monitor.
Press the tab down.
2. Wet both electrodes on the back
of the heart rate monitor to create
a strong connection between your
chest and the transmitter.
3. Wrap the strap around your chest
and attach it to the other side of
the heart rate monitor.