Using sight ‘n go, Calibrating the compass – Garmin 130 User Manual
Page 41
Rino
®
130 Owner’s Manual
35
U
NIT
O
PERATION
>
N
AVIGATION
P
AGE
Using Sight ‘N Go
To use Sight ‘N Go to navigate:
1. Use the
Page button to access the Navigation
Page and then use the
Thumb Stick to access
the
Option Menu .
2. Use the
Thumb Stick to highlight Sight ‘N Go
and press In. Note that the compass ring with
pointer is in-line with the two sighting marks on
the case.
3. Hold the Rino 130 at eye level and line up the two
sighting marks on the case with the distant object.
Press the
Thumb Stick to Lock Direction.
4. To navigate to your destination, select
Set Course
and press the
Thumb Stick. Begin traveling to
your destination using the pointer as a guide.
To view your destination as a waypoint, select
Project Waypoint and press the Thumb Stick. To
re-sight the destination, press the
Thumb Stick In
when
Re-Sight is highlighted.
Rino 130 held level
for Sight ‘N Go
Sighting Marks
Calibrating the Compass
The Electronic Compass must be calibrated outdoors
when you first use the Rino 130 and after new batteries
have been installed. The accuracy of the Electronic
Compass is adversely affected if the unit is not held level
or is held near items that generate magnetic fields, such as
cars, large belt buckles, etc.